|
December 10, 2008 00:12 AM  BY STACEY BARRUS
|
|
Recent research by Wavin Plastics into the
publics perception of under floor heating systems
has revealed more than a third of house buyers
would include this type of heating in their top
five wish list of luxury items when buying a new
home.
While findings show that
awareness of under floor heating systems
and its benefits are high, only a tenth of the
population have actually lived in a property
which has such a heating system. However, 37% have
experienced the comfort of these heating
systems either by visiting a home or hotel which has
the system installed.
There are many benefits to
under floor radiant heating systems, such as
warmth without the dryness of central heating,
comfortable to walk on with bare feet, as well
as being very energy efficient.Many times, once
people have experienced how fantastic radiant
heating systems are they want them in their own homes.
More and more people are realizing the benefits
of radiant under floor heating.
Surprisingly, these radiant
floor heating systems are now very
affordable.There is virtually a system out there
for every budget.If you’ve always
dreamt about the possibilities of having floor
heating, but always assumed it was too
expensive, you should contact the staff at warmzone.com
about economical floor heating solutions.
|
|
December 15, 2008 00:12 AM  BY STACEY BARRUS
|
|
Yes, it might take a little effort, but being
more environmentally friendly doesn’t
have to involve major renovations. Many people waste a
lot of energy by not sealing cracks, doors and windows.
Checking to make sure a home’s insulation
is in good shape and replacing it if it’s
not is another good surefire way to stop, prevent, and
reverse energy waste.
Quite simply put, radiant
heaters are the most efficient form of heat
available in today’s market.
Significantly less operating time is required to attain
and maintain the desired warmth compared to
furnaces and other, traditional methods of
heating, which keeps operational costs to a minimum.
High efficiency boilers or
electric radiant floor systems makes radiant
heat one of your most efficient ways to heat your
home. Combined with a well-insulated home these
systems can quickly warm your home and then shut
down or wait idle for long periods of time before being
called upon by the thermostat to operate. Don’t
waste expensive heating fuel another day.
Radiant Heaters Tip: More than ever before,
homebuilders, househunters, and home renovators alike are
looking for energy-efficient heating options for
houses. We say they need look no further than radiant
heaters for their ideal home heating solution.
|
|
December 28, 2008 00:12 AM  BY STACEY BARRUS
|
|
If you are looking to warm your floors with radiant
heaters and are trying to research what kind of
radiant heaters to install you might find
yourself scratching your head at this point.
There are dozens of products available to purchase, and
there are even more companies telling you that
their product is the best.
So which product is the best?
Should you install a hydronic heating system
that pumps hot water through your floors, an electric
cable heating system, or a low-voltage screen
system? The answer lies in the type of project
you are doing. Not every system is ideal for every
project, but there is an ideal system for every project.
Hydronic Heating Systems
Hydronic floor heating is the
oldest and most popular type of radiant floor
heating. These systems are comprised of a boiler or hot
water heater, pumps, manifolds, PEX tubing,
thermostat, and either gypcrete (a concrete-like
material) or wood panels. Hydronic heating is the most
complex of all radiant heat systems. These systems
require trained professionals to design and
perform the installation. Your best economies of
scale are achieved for hydronic systems in large areas
or entire homes because of their expensive
components and operational costs.
Hydronic systems can be installed under any
type of flooring. Most hydronic systems require hot
water tubing to be installed in a 2-4″
bed of light concrete and are best installed during
the initial construction because of its weight load
demands and adjustments to floor height. Recent
low-mass products have been developed to avoid
these challenges by fitting the tubing into pre-cut
wood panels, making hydronic systems more convenient and
possible for most major remodeling projects.
If you want to heat smaller areas
like a bathroom or kitchen, a hydronic floor
heating system may not be the best value for
your project. The complexity and cost of installing the
system, along with the long-term maintenance and
up-keep required, is not worth the small amount
you will save in operational costs.
Electric Cable Heating
Electric cable heating
systems, often called line- or high-voltage
systems, are gaining popularity and are ideal for
heating smaller areas (10-300 square feet) like
bathrooms, kitchens, and sun rooms. These
systems are comprised of a thermostat and a heating
cable. On some systems, the cable will be
shipped to you as a large spool of cable. These
systems are oftentimes less expensive, and give you the
ability to space the cable how you want and
customize a layout that will heat every square
inch of your floor. Other systems have the cable
attached to a plastic mesh or tape to create a
mat to maintain its proper spacing.
Every available cable system is equally effective, so when
determining which system to purchase, you should look
at the warranty of the product, along with the ease of
installation. Some cables must be embedded in a
separate layer of concrete or mortar, whereas other systems
can simply be installed in the thinset. Most cable
systems can only be installed under tile. However, on
others, if the cable is embedded in mortar or concrete,
any flooring can be installed on top of the concrete. When
heating smaller areas, it is nearly impossible to beat
the simplicity and price of an electric cable heating
system.
|
|
December 11, 2008 00:12 AM  BY STACEY BARRUS
|
|
In today’s housing market, it’s
not a bad idea to add value to your home in new
and innovative ways.For example, don’t
just think about renovating a bathroom, consider
using radiant
heaters to warm towel racks in the bathroom, or a
heated floor.Can you think of anything
cozier on a chilly winter morning than toasty
toes when you step out of the shower?
Not only is radiant heating is
one of the most comfortable ways to heat your
home, but radiant heaters also offer a surprisingly wide
diversity of applications. Radiant
heaters can be used in a number of applications,
including in tiled areas, hardwood flooring,
carpeted areas, cement floors, basements, and
garages. You see, radiant
heaters are a type of heater that warms objects
instead of air. Radiant heat uses objects, such
as the floor, to heat a home. The air in the
room is warmed when it comes into contact with the
warmed objects. Heat loss is reduced and the
radiant heat remains in the lower part of the
room, warmer near feet level and slightly less so at
head level, creating the perfect climate for
comfort.
Radiant Heaters Tip:
whether you’re building a new home or
updating your current home, you owe it to yourself to
check out the comfort that radiant heat has to offer.
|
|
December 29, 2008 00:12 AM  BY ROBERT COHEN
|
|
The Mystery
Warranty
How much
do you really know about the warranties offered
by manufacturers? Sure it may say “25 Year
Warranty” on the package, but what exactly does that
mean? Most manufacturers of radiant heating systems
offer a warranty, but a 25 year warranty isn’t
always better than a 10 year warranty and this is why:
I chose the
Danfoss GX electric radiant heat cables to build an asphalt
heated driveway at my residence. The heat of the asphalt
combined with heavy weight, caused me to wonder how
the GX cables were going to hold up, and what would
happen if a problem occurred. I was pleased to
discover that Danfoss products have a 10 year warranty, that
covers up to 5 times the cost of original
installation. Why is this exciting? Because the
failure of a radiant heating system isn’t like a
vacuum cleaner breaking down, you can’t throw
it in your car and bring it back to the store for a
refund. Fixing a severed cable requires tearing up the
surface of the driveway – or in the case of indoor
radiant heating, tearing up your brand new tiles or
wood flooring. The process of tearing up a floor or
driveway is time consuming and costly, not to mention
annoying. Many manufacturers will replace the bad product,
but you still have to pay out of your own pocket to
tear up the floor and hire someone to fix the problem.
Danfoss is so
sure that you won’t have any problems, their warranty
is the best offered by radiant heat manufacturers. Not
only do you get brand new Danfoss product, but they
will cover the cost of floor removal, and
reinstallation (up to 5 times the cost of the original
installation). So when you install your radiant floor
or driveway, you can rest easy knowing that unexpected
problems are already covered.
|
|
|